「VBScript」修改win7 IP

 Dim strIPAddress  
 Dim strSubnetMask  
 Dim strGateway  
 Dim strDns1  
 Dim strDns2  
 Dim temp  
 '輸入IP
 temp=InputBox("Please Enter IP : (or input DHCP)","GFI IP Setting")  
 '如果是DHCP就不做任何事
 If temp <> "DHCP" Then  
         strIPAddress = temp  
      strSubnetMask = "255.255.255.0"  
     '計算 Gateway ， 本例的Gateway 為 192.168.x.254 ，x為網段  
      intLastDecimal = 1  
      For intCounter = 1 to 3  
           intLastDecimal = InStr(intLastDecimal, strIPAddress , ".") + 1  
      Next  
      iNewLength = intLastDecimal-2  
      strNewIP = Left(strIPAddress , iNewLength )  
      strNewIP =strNewIP & ".254"   
     'end 計算Gateway
      strGateway = strNewIP   
      '定義好DNS
      strDns1 = "168.95.1.1"  
      strDns2 = "8.8.8.8"  
      '宣告使用shell
      Set objShell = WScript.CreateObject("Wscript.Shell")  
      '透過netsh指令來修改IP
      objShell.Run "netsh interface ip set address ""區域連線"" static " & strIPAddress & " " & strSubnetMask & " " & strGateway & " " , 0, True       
     '設定第一組DNS
      objShell.Run "netsh interface ip set dns ""區域連線"" static "& strDns1, 0, True   
      '加入第2組DNS
      objShell.Run "netsh interface ip add dns ""區域連線"" addr="& strDns2, 0, True       
      'Wscript.Echo "netsh interface ip set address ""區域連線"" static " & strIPAddress & " " & strSubnetMask & " " & strGateway & " "   
      Set objShell = Nothing  
      WScript.Quit       
 End If